19 Sep 2013, 06:35
Has anyone tried painting on Alumacorr, or Dibond. I am wondering if I sand lightly, then prime with Alkyd Primer. Then if that sticks I should be able to use a 100% Acrylic Latex and Artists grade Acrylic paints to do an Illustration.
04 Nov 2013, 01:30
I have had good results with a variety of paints on aluminum composite panels, including aerosol paints.
Most of the time scuffing and cleaning are not necessary if you paint right after removing the plastic protective film.
I test my paint/primer on a scrap of material. After the test paint is dry, I apply a strip of Gorilla tape, pull it off at a 90 degree angle.
If the paint stays put, you're in business.
Hope this helps.